Gas Sensor | Gas Sensors | Gas Detector manufacturer supplier wholesaler distributor-

Toxic Gas Detectors

Multi Gas Detector
The ITEL is designed for use with catalytic combustible sensor, electrochemical cell sensor, PID sensor and infrared sensor.

Features

Industry standard linear 4-20mA output.
Dry Contact, HART and RS-485 output.
Compatible with standard control equipment.
18-32 VDC input voltage range.
Zero, span and calibration adjustment using a magnet.
UL/CNS(IEC)/CCCF/CPA/CQST approved for hazardous area use.
CE approved for RFI/EMC protection.
Low maintenance and easy One-Man calibration.

Toxic Gas Detectors

Multi Gas Detector

The ITEL is designed for use with catalytic combustible sensor, electrochemical cell sensor , PID sensor and infrared sensor.

Features

Industry standard linear 4-20mA output.
Dry Contact, HART and RS-485 output.
Compatible with standard control equipment.
18-32 VDC input voltage range.
Zero, span and calibration adjustment using a magnet.
UL/CNS(IEC)/CCCF/CPA/CQST approved for hazardous area use.
CE approved for RFI/EMC protection.
Low maintenance and easy One-Man calibration.

Toxic Gas Detection

Toxic Gas Detector

The 7000 is designed for use with Electrochemical Cell or Infrared sensor.

Features

Industry Standard Linear 4-20mA, Dry Contact and RS-485 output.
Compatible with standard control equipment.
18-32 VDC Input Voltage Range.
Zero, Span and Calibration adjustment using a magnet.
CNS(IEC) Approved for Hazardous Area use.
RFI/EMC protection.
Low Maintenance and easy One-Man Calibration.

Toxic Gas Detection System

Toxic Gas Detector

The 7100 is a combination of a MTI Housing with Local Display and a 2-wire, Loop Powered, Electrochemical Cell sensor.

Features

2-wire 4-20mA loop powered Toxic gas detector.
Industry Standard Linear 4-20mA output.
Compatible with standard control equipment.
18-32 VDC Input Voltage Range.
CNS(IEC) Approved for Hazardous Area use.
RFI/EMC protection.
Low Maintenance and easy Calibration.

Oxygen Detector

Toxic Gas Detector

The 7200 is a combination of a MTI Housing with Local Display and a 2-wire, Loop Powered, Oxygen Electrochemical Cell sensor.

Features

2-wire 4-20mA loop powered Oxygen detector.
Industry Standard Linear 4-20mA output.
Compatible with standard control equipment.
18-32 VDC Input Voltage Range.
CNS(IEC) Approved for Hazardous Area use.
RFI/EMC protection.
Low Maintenance and easy Calibration.

Toxic Gas Detection Systems

Toxic Gas Detector

The 7300 is designed for use with Electrochemical Cell sensor.

Features

Industry Standard Linear 4-20mA.
Compatible with standard control equipment.
18-32 VDC Input Voltage Range.
CNS(IEC) Approved for Hazardous Area use.
RFI/EMC protection.
Low Maintenance.

Gas Detection

Gas Detector

The Series of 9500 is designed to use an electrochemical cell.

Features

Industry standard linear 2-wired loop powered 4-20mA.
Compatible with standard control equipment.
Combining with control system.
Applying to PLC and DCS.
18-32 VDC input voltage range.
Low maintenance and easy One-Man calibration.

Combustible Gas Detectors

Multi Gas Detector

The ITEL is designed for use with catalytic combustible sensor, electrochemical cell sensor , PID sensor and infrared sensor.

Features

Industry standard linear 4-20mA output.
Dry Contact, HART and RS-485 output.
Compatible with standard control equipment.
18-32 VDC input voltage range.
Zero, span and calibration adjustment using a magnet.
UL/CNS(IEC)/CCCF/CPA/CQST approved for hazardous area use.
CE approved for RFI/EMC protection.
Low maintenance and easy One-Man calibration.

Combustion Gas Detectors

Combustible Gas Detector

The 6000-KD is designed for use with catalytic combustible sensor.

Features

Industry standard linear 4-20mA output.
Compatible with standard control equipment.
18-32 VDC input voltage range.
Zero, span and calibration adjustment using a magnet.
CNS(IEC)/CPA/CQST approved for hazardous area use.
RFI/EMC protection.
Low maintenance and easy calibration.

Combustion Gas Detector

Combustible Gas Detector

The 6000-KN is designed for use with catalytic combustible sensor.

Features

Industry standard Linear 4-20mA output.
Compatible with standard control equipment.
18-32 VDC input voltage range.
CNS(IEC)/CCCF/CPA/CQST approved for hazardous area use.
RFI/EMC protection.
Low maintenance.

Flammable Gas Detector

Combustible Gas Detector

The 6000-PN is designed for use with catalytic combustible sensor.

Features

Industry standard linear 4-20mA output.
Compatible with standard control equipment.
18-32 VDC input voltage range.
CPA approved for hazardous area use.
RFI/EMC protection.
Low maintenance.

Multi Gas Detector

The ITEL is designed for use with catalytic combustible sensor, electrochemical cell sensor , PID sensor and infrared sensor.

Features

Industry standard linear 4-20mA output.
Dry Contact, HART and RS-485 output.
Compatible with standard control equipment.
18-32 VDC input voltage range.
Zero, span and calibration adjustment using a magnet.
UL/CNS(IEC)/CCCF/CPA/CQST approved for hazardous area use.
CE approved for RFI/EMC protection.
Low maintenance and easy One-Man calibration.

Combustible Gas Detector

The 6000-KD is designed for use with catalytic combustible sensor.

Features

Industry standard linear 4-20mA output.
Compatible with standard control equipment.
18-32 VDC input voltage range.
Zero, span and calibration adjustment using a magnet.
CNS(IEC)/CPA/CQST approved for hazardous area use.
RFI/EMC protection.
Low maintenance and easy calibration.

Combustible Gas Detector

The 6000-KN is designed for use with catalytic combustible sensor.

Features

Industry standard Linear 4-20mA output.
Compatible with standard control equipment.
18-32 VDC input voltage range.
CNS(IEC)/CCCF/CPA/CQST approved for hazardous area use.
RFI/EMC protection.
Low maintenance.

Combustible Gas Detector

The 6000-PN is designed for use with catalytic combustible sensor.

Features

Industry standard linear 4-20mA output.
Compatible with standard control equipment.
18-32 VDC input voltage range.
CPA approved for hazardous area use.
RFI/EMC protection.
Low maintenance.

VOC Gas Detectors

Multi Gas Detector

The ITEL is designed for use with catalytic combustible sensor, electrochemical cell sensor , PID sensor and infrared sensor.

Features

Industry standard linear 4-20mA output.
Dry Contact, HART and RS-485 output.
Compatible with standard control equipment.
18-32 VDC input voltage range.
Zero, span and calibration adjustment using a magnet.
UL/CNS(IEC)/CCCF/CPA/CQST approved for hazardous area use.
CE approved for RFI/EMC protection.
Low maintenance and easy One-Man calibration.

Infrared Gas Detectors

Multi Gas Detector

The ITEL is designed for use with catalytic combustible sensor, electrochemical cell sensor , PID sensor and infrared sensor.

Features

Industry standard linear 4-20mA output.
Dry Contact, HART and RS-485 output.
Compatible with standard control equipment.
18-32 VDC input voltage range.
Zero, span and calibration adjustment using a magnet.
UL/CNS(IEC)/CCCF/CPA/CQST approved for hazardous area use.
CE approved for RFI/EMC protection.
Low maintenance and easy One-Man calibration.

Gas Sampling Pump

The model GSP is gas sampling pump, providing with LED(Power/Fault) and dry contact(Fault), connecting with gas detector to display and to signal output.

Features

Dry Contact(Fault).
LED(Power/Fault).
18-32 VDC input voltage range.
CNS(IEC) approved for hazardous area use.
RFI/EMC protection.
Low maintenance and easy to use.

Toxic Gas Sensors

Gas Sensor

The MTI 8000 gas sensor offers users a low cost solution to their gas monitoring needs, indoor or outdoor and even in potentially explosive atmospheres.

Features

Toxic and oxygen versions available.
Compatible with MTI gas transmitter.
Suitable for indoor or outdoor use.
Simple to replace.
Long expectancy sensor life.

Electrochemical Sensor

Gas Sensor

The MTI 8100 gas sensor offers users a low cost solution to their gas monitoring needs, indoor or outdoor and even in potentially explosive atmospheres.

Features

Toxic and oxygen versions available
MTI 8100 sensor is using on MTI 7100 toxic Gas detector / MTI 7200 oxygen detector
Suitable for indoor or outdoor use
Simple to replace
Long expectancy sensor life

Gas Detector Sensor

Gas Sensor

The MTI 8200 VOCs sensor offers users a low cost solution to their gas monitoring needs.

Features

Compatible with MTI ITEL multi gas transmitter
Suitable for indoor or outdoor use
Simple to replace
Long expectancy sensor life

IR Gas Sensor

Gas Sensor

The MTI 8300 Infrared sensor offers users a low cost solution to their gas monitoring needs.

Features

Compatible with MTI ITEL multi gas transmitter & 7000 toxic gas detector
Suitable for indoor or outdoor use
Simple to replace
Long expectancy sensor life

Gas Controllers

Controller

The Model 1000 is a single channel controller for single detector and easy to use.

Features

Single channel.
Four 7 segment digital display.
User selectable alarm range.
Over-Range alarm.
RFI/EMC protection.
Low maintenance and easy to use.
Wall mounted and simple to install.

Controll System

Controller

The model 3000 can link up to 32 detectors and is easy for use.

Features

Four 7 segment digital display.
4-20mA or RS-485 output.
User selectable alarm range.
Over-Range alarm.
RFI/EMC protection.
Low maintenance and easy to use.
Wall mounted and simple to install.

Controll Systems

Controller

The modular design 3100 enables user to define, in detail, the unique control and alarm parameters to fulfil requirements. Each rack of up to 8 control cards provides 4-20mA and RS-485 to allow the continuous monitoring of each channel’s condition. The new generation 3100 control cards provide display and alarm facilities for the full range of MTI gas detectors.

Features

Modular design for 19" rack mounted.
Five 7 segment digital LED display.
Fully user programmable scale, unit and calibration.
User selectable alarm range.
Self diagnostic and system test.
CCCF approved for hazardous area use.
Over-Range alarm and inhibit.

Gas Controls

Controller

The 3064 is a combination of a Controller with a LCD touch screen and SCADA (Supervisor Control And Data Acquisition) software. Data from detectors at a factory, field or in other remote locations sends to the 3064 which manages and monitors the entire system in real time. The 3064 links up to 64 detectors and is easy to use.

Features

Link up to 64 detectors.
Graphical and digital touch screen display.
User selectable alarm range.
Self diagnostic.
Over-Range alarm.
Graphic configuration, easy to use.